, ,

Sound Devices 633


  • High-End Produktions-Tonmischer / Rekorder
  • 6 Kanäle (3 Mic/Line, 3 Line)
  • Nimmt gleichzeitig auf CF und SD Karten auf
  • Der Timecode wird über den bewährten Ambient Clockit Schaltkreis versorgt
  • Begrenzer und high-pass Filter laufen auf der Analog Stage

60,00

Die 633 ist ein kompakter Tonmischer mit 6 Eingängen und einem integrierten 10 spurigen Aufnahmegerät, der über 6 Analog Eingänge verfügt und Aufnahmen auf SD und CompactFlash Karten abspeichert. Die 633 wurde speziell für Tontechniker entwickelt, die großen Wert auf Mobilität legen, ohne dass die Aufnahmequalität darunter leidet.

Verwandte Produkte

Kortwich Tasche für SD 633
Ambient VPAK II V-Mount Hirose Stromversorgung
IDX Endura CUE-D75 14.8V 73Wh V-Mount Lithium-Ionen Akku
Tentacle Sync Tentacle
Tentacle Sync Lemo an Tentacle Adapterkabel
Ambient Mixer-MAZ Tieline

Im Set enthalten
  • Sound Devices 633
  • XL-LB2 Lemo > BNC Timecode Ein/Aus Kabel
  • 2x TA3F > XLRM (X1, X2 – Ausgangskabel)
  • 3x TA3F > XLRF ( Kanäle 4,5,6 – Eingangskabel)
  • Bildschirmschoner
Kategorien: , ,

Analog Inputs

Frequency Response
10 Hz to 40 kHz ± 0.5 dB, -3 dB @ 65 kHz (192 kHz sampling rate reference 1 kHz)
THD + Noise
0 .09% max (1 kHz, 22 Hz–22 kHz BW, fader at 0, 0 dBu output)
Equivalent Input Noise
-126 dBu (-128 dBV) maximum. (22 Hz – 22 kHz bandwidth, flat filter, trim control fully up)
Input Types
  • XLR Mic: active-balanced for use with ≤600 ohm mics, 4k ohm actual; 12V or 48V phantom power, 10 mA max
  • XLR AES: AES3 or AES42 (10 V power), SRC
  • XLR Line: active-balanced for use with ≤2k ohm outputs, 10k ohm actual
  • TA3 Line: active-balanced for use with ≤2k ohm outputs, 10k ohm actual
  • RTN (3.5 mm): unbalanced stereo for use with ≤2k ohm outputs, 30k ohm actual
Maximum Input Level
  • XLR Mic: 0 dBu (0 .78 Vrms)
  • XLR Line: +40 dBu (80 Vrms)
  • RTN (3 .5 mm): +24 dBu (12 .4 Vrms)
Maximum Gain
  • Mic-In-to-Line-Out: 91 dB
  • Mic-In-to-Aux-Out, -10 Out: 77 dB
  • Line-In-to-Line-Out: 39 dB
High-Pass Filters
Sweepable 80 Hz to 240 Hz, 12 dB/oct at 80 Hz, 6 dB/octave at 240 Hz
Microphone Powering (each analog Input selectable)
  • 12 V Phantom: through 680 ohm resistors, 10 mA per mic available
  • 48 V Phantom: through 6 .8k resistors, 10 mA per mic available
Analog Input Limiters (Inputs 1-3)
  • Affects the output of the mic preamps only (‘Trim’ stage) · +16 dBu threshold (fixed)
  • 20:1 limiting ratio
  • 1 mS attack time
  • 500 mS release time
Digital Input Limiters (Inputs 1-6)
  • Post-fader
  • +6 dBu to +18 dBu threshold (adjustable) · 20:1 limiting ratio
  • 1 mS attack time
  • 500 mS release time

Digital Inputs

AES42
  • AES42 Mode 1, provides +10 V Digital Phantom Power

Analog Outputs

Output Type
  • XLR Line: Active Balanced for use with ≥600 ohm inputs
  • XLR -10: Active Balanced for use with ≥10k ohm inputs
  • XLR Mic: Active Balanced for use with ≥600 ohm inputs
  • TA3 Active Balanced Mic/Line: pin-2 and 3 driven, for use with ≥3k ohm inputs · X3,X4 (3 .5 mm): Unbalanced, stereo, for use with ≥6k ohm inputs
  • Headphones (1/4”): Unbalanced, stereo, for use with 8-2k ohm headphones
Output Impedance (ohms actual)
  • XLR and TA3 balanced outputs: 100 ohms at Line setting, 3 .2k ohms at -10 setting, 150 ohms at Mic setting
  • TA3 Balanced Outs: 1k ohms at Mic and Line settings · X3,X4 (3 .5 mm): 100 ohms
  • Headphones (1/4”): 100 ohms
Line Output Clipping Level (1% THD)
20 dBu minimum with 10k load
Maximum Output Level
  • Line: +20 dBu (7.8 Vrms)
  • -10: +6 dBu (1.5 Vrms)
  • Mic: -20 dBu (0.078 Vrms)
  • Aux 3/4: +6 dBu (1.5 Vrms)
Output Limiters
  • Affects the outputs of the mixer
  • Threshold selectable from +4 dBu to +18 dBu, 1 dB steps · 20:1 limiting ratio
  • 1 mS attack time
  • 500 mS release time
Maximum Gain – Typical (Trim, Fader, Master, Phones, RTN fully up)

MIC Level Input

LINE Level Input

RTN

Master Outs (XLR) @ LINE

91 dB 51 dB

Master Outs (XLR) @ -10

77 dB 37 dB

Master Outs (XLR) @ MIC

51 dB 11 dB

X3, X4 Outs (3 .5 mm)

77 dB 37 dB

Headphones (1/4”)

107 dB 67 dB 5dB

Digital Outputs/Recorder

AES3 Output
  • Transformer-balanced AES Out A,B on XLR
  • 110 ohm, 2 V p-p, AES and S/PDIF compatible with RCA adaptor
Sampling Frequency
  • 44.1 kHz
  • 47.952 kHz
  • 48 kHz
  • 48.048 kHz
  • 88.2 kHz
  • 96 kHz
  • 192 kHz
A/D
24 bit
A/D Dynamic Range
114 dB, A-weighted, typical
Recording Storage Type
  • SD, SDXC, SDHC Card
  • FAT32 or exFAT formatted, will format media on-board
  • CompactFlash (CF)
  • FAT32 formatted for CF and SD 32 GB, will format memory cards in-unit
File Type
  • Record: WAV (Broadcast Wave File format), polyphonic or MP3
  • Playback: WAV (Broadcast Wave File format), polyphonic or MP3
Timecode and Sync
  • Modes Supported: off, Rec Run, Free Run, 24h Run, External
  • Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND
  • Accuracy: Ambient generator, 0.2 ppm (0.5 frame in 24 hr)
  • Time Code Input: 20k ohm impedance, 0.3 V – 3.0 V p-p (-17 dBu – +3 dBu)
  • Time Code Output: 1k ohm impedance, 3.0V p-p (+12 dBu)
Sample/Timecode Accuracy
± 0.2 ppm (0.5 frames per 24 hours)
Power
  • External: 10-18 V on locking 4-pin Hirose connector, pin-4 = (+), pin-1 = (-).
  • Removable x 2: 7.2 V (nominal) Sony L-type Li-ion, operational from 6.5–8.5 V,
  • Internal: accepts 6 AA-sized (LR6) batteries, 1.2-1.6 V nominal (NiMH rechargeable compatible)
Environmental
  • Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing)
  • Storage: -40°C to 85°C
Dimensions and Weight
  • Dimensions: 6 cm x 24 cm x 14 cm (H x W x D); 2.2” x 9.4” x 5.6”
  • Weight: 1.1 kg; 2 lbs. 9 oz. (unpackaged, without batteries)

SHOPPING CART

close