, ,

Sound Devices 664


  • High-End Produktions-Tonmischer / Rekorder
  • 12 Kanäle (6 Mic/Line + 6 Line)
  • Nimmt gleichzeitig auf CF und SD Karten auf
  • Der Timecode wird über den bewährten Ambient Clockit Schaltkreis versorgt
  • Begrenzer und high-pass Filter laufen auf der Analog Stage

65,00

Die 664 war der erste der beliebten Tonmischer/Rekorder der 6-Serie und verfügt über 12 Analog Eingänge, vier Ausgänge und nimmt diese 16 Spuren sowohl auf CF, als auch auf SD-Karten auf. Dank dieser noch nie dagewesenen Aufnahmekapazitäten und I/O Anschlussmöglichkeiten ist die 664 perfekt für eine Vielzahl an Produktionsanwendungen geeignet.Die 664 ist mit sechs Mic/Line-Eingängen ausgestattet, die sich durch eine hohe dynamische Reichweite und extrem geringem Rauschen auszeichnen. Diese Preamps bieten Analog Peak-Limiter, High-pass Filter, Trim-Regler und direkte Ausgänge. Die Inputanschlüsse 1 und 6 können für den Empfang von AES42 oder AES3 Signalen ausgewählt werden. Auf sechs Line-Level Eingänge kann zugegriffen werden, indem Direktausgänge als Eingänge über das Input Setup Menü neu zugewiesen werden.
Mit einem montierten CL-6 Controller haben die Eingänge 7-12 eine festgelegte Fadersteuerung.

Kategorien: , ,

Frequency Response

  • 20 Hz to 50 kHz, ± 0.5 dB

THD + Noise0.09% max (50 kHz, +18 dBu at line out, fade fully up)

Equivalent Input Noise

  • -126 dBu (-128 dBV) maximum. (22 Hz – 22 kHz bandwidth, flat filter, trim control fully up)

Inputs

  • XLR Mic: active-balanced for use with ≤600 ohm mics, 4k ohm actual; 12V or 48V phantom power, 10 mA max
  • XLR AES: AES3 or AES42 (10 V power), SRC
  • XLR Line: active-balanced for use with ≤2k ohm outputs, 10k ohm actual
  • TA3 Line (7-12): active-balanced for use with ≤2k ohm outputs, 10k ohm actual
  • RTN A,B,C (3.5 mm/10-pin): unbalanced stereo for use with ≤2k ohm outputs, 30k ohm actual

Maximum Input Level

  • XLR Mic: 0 dBu (0.78 Vrms)
  • XLR Line: +40 dBu (80 Vrms)
  • RTN A,B,C (3.5 mm/Multi-pin): +24 dBu (12.4 Vrms)

High-Pass Filters

  • Sweepable 80 Hz to 240 Hz, 12 dB/oct at 80 Hz, 6 dB/octave at 240 Hz

Input Limiters

  • Individual limiters on both trim and fader stages, +16 dBu threshold, 20:1 limiting ratio, 1 mS attack time, 500 mS release time

Link I/O

  • Unbalanced stereo for linking to MixPre, 302, 442, 552, and 664; 2k ohm impedance

Maximum Gain

  • Mic-In-to-Line-Out: 93 dB
  • Mic-In-to-Aux-Out, -10 Out: 79 dB
  • Line-In-to-Line-Out: 39 dB

Output Type

  • Line: transformer-balanced for use with >=600 ohm inputs, 100 ohms
  • -10: transformer-balanced for use with >=10k ohm inputs, 3.2k ohm
  • Mic: transformer-balanced for use with >=600 ohm inputs, 150 ohms
  • TA3 Mic/Line: active-balanced, pin-2 and 3 driven, for use with >=3k ohm inputs, 1k ohm
  • TA3 Direct Outs Mic/Line: active-balanced, pin-2 and 3 driven, use with >=3k ohm inputs, 1k ohm
  • Tape Outs (3.5 mm and TA3-type): unbalanced, stereo, use with >=6k ohm input, 1.8k ohm actual
  • Headphones (3.5 mm and 1/4″): unbalanced, stereo, use with 8-2k ohm headphones, 50 ohms

Line Output Clipping Level

  • (1% THD) 20 dBu minimum with 10k load

Maximum Output Level

  • Line: +20 dBu (7.8 Vrms)
  • -10: +6 dBu (1.5 V rms)
  • Mic: -20 dBu (0.078 Vrms)
  • Tape Outs: +6 dBu (1.5 Vrms)

Output Limiters

  • Affects analog output. Threshold selectable from +4 dBu to +20 dBu, 1 dB steps, 20:1 limiting ratio, 1 mS attack time, 500 mS release time.

Recording Tracks

  • 16 tracks (12 inputs, 4 output buses), monophonic or polyphonic Broadcast WAV or timecode-stamped MP3

A/D

  • 24-bit, 114 dB, A-weighted dynamic range typical; 44.1 kHz, 47.952 kHz, 48 kHz, 48.048 kHz SR

Digital Outputs

  • AES3 transformer-balanced, in pairs; 1-2 XLR-L, 3-4 XLR-R, 5-6, multi-pin 1, 7-8, multi-pin 2, 110 ohm, 2 V p-p, AES and S/PDIF compatible

Recording Storage Type

  • SDHC, SD, SDXC – exFAT for cards >32 GB, FAT32 for

Sample/Timecode Accuracy

  • ± 0.2 ppm (0.5 frames per 24 hours)

Timecode and Sync

  • Modes Supported: off, Rec Run, Free Run, 24h Run, External
  • Frame Rates: 23.976, 24, 25, 29.97DF, 29.97ND, 30DF, 30ND
  • Accuracy: Ambient generator, 0.5 frame in 24 hr
  • Time Code Input: 20k ohm impedance, 0.3 V – 3.0 V p-p (-17 dBu – +3 dBu)
  • Time Code Output: 1k ohm impedance, 3.0V p-p (+12 dBu)
  • Word In/Out: square wave; 10k/75 ohm, 1-5V p-p input; 75 ohm, 3.3V p-p output, at SR

Power

  • External: isolated 10-18 V on locking 4-pin Hirose connector, pin-4 = (+), pin-1 = (-).
  • Internal: accepts five (5) NiMH, 1.5V Lithium, or Alkaline AA batteries. Note that run time will be very limited when using Alkaline batteries (30 minutes to one hour depending on settings). NiMH or Lithium batteries are the preferred type because of the approximate 2x to 4x run time compared to Alkalines.

Environmental

  • Operating: -20°C to 60°C, 0 to 90% relative humidity; (non-condensing) Storage: -40°C to 85°C

Dimensions and Weight

  • Dimensions: 5.3 cm x 32 cm x 19.8 cm (H x W x D) 2.1″ x 12.6″ x 7.8″
  • Weight: 4 lbs. 12 oz. (unpackaged, without batteries)

SHOPPING CART

close