DJI Focus Pro Creator Combo Extended

The DJI Focus Pro Creator Combo Extended equips you with all the tools you need to achieve precise FIZ control in single-shooter configurations. Our extended combo includes a LiDAR unit, a Focus Pro Motor, a Focus Pro Grip and the Lidar Range Finder to DJI Transmission cable hub to enable stabilization, image control and control from a distance as well as autofocus in combination with a DJI RS 3 Pro/RS4 Pro gimbal and the DJI Transmission Combo.

This combo is equipped with an integrated camera featuring a 30mm focal length equivalent and a 70° field of view, ensuring precise focus. Switch between wide-angle, telephoto, and focused spot modes according to your shooting requirements. Activate ActiveTrack Pro by pairing it with the RS 4 Pro gimbal for enhanced subject recognition and tracking, even with multiple or distant subjects. It also supports the Focus Pro Motor, delivering precise, cinema-quality autofocus. The LiDAR unit can be mounted on your RS 3 or RS 4 Pro gimbal or camera using a cold shoe or 1/4″-20 thread and is powered via a USB-C cable.

When used alongside the Focus Pro Motor, the LiDAR unit enables autofocus for compatible lenses. Its 76,800 ranging points cover an area between 1.6 and 65.6 feet. Additionally, it includes an integrated camera with a 30mm equivalent focal length and a broad 70° field of view, accommodating the focus demands of various scenarios.

The advanced ActiveTrack Pro can capture images directly from the camera integrated within the Focus Pro LiDAR Autofocus, eliminating the need for the Ronin Image Transmitter. With ActiveTrack Pro, you can monitor and frame your subject directly on the RS 4 Pro’s OLED touchscreen. If the subject is momentarily obscured, the LiDAR unit swiftly repositions and maintains focus on the target.

By connecting the DJI LiDAR Rangefinder to the DJI Video Transmitter and other accessories, you get a complete system for focusing and image control for any combination of camera and manual lens. This also enables lens calibration and autofocus for manual lenses.

In the Case

• LiDAR Range Finder (with cold shoe bracket)
• Ronin Focus Pro motor
• DJI BG 21 battery grip
• DJI Pro Grip screen
• Nato adapter mount (with 2 black hex screws)
• Rod adapter slide rail
• Horizontal adapter slide rail
• Camera riser plate with focus motor rod bracket and adjustable placement guide
• Focus gear strip
• 2x USB C > USB C cable
• USB C > USB A cable
• USB C > USB C LiDAR control cable
• Lidar Range Finder to DJI Transmission cable hub
• 15mm rod 17cm
• 2x 1/4″ hex screw
• 2x M4 hex screw
• 2x 1/4″ screw
• 2x hex key
• AC adapter
• 2x manual
• Hard case