Aputure STORM 80c 3-Light Kit

The Aputure STORM 80c 3-Light Kit gives you three compact 80 W full-color point-source lights and a selection of modifiers in one rolling hard case. That's enough for a classic three-point interview setup, product shots and small sets, or for use as practicals and accent lights. Each head weighs 1.35 kg including the yoke, so you can also hide one on a shelf or clamp it to a pipe.

Light and color

The BLAIR-CG engine covers 1800 to 20,000 K with full green/magenta correction across the ASC MITC range (CRI 97, TLCI 99). Beyond white light, you get saturated RGB colors (over 90 % of Rec.2020) and built-in effects, for example to add a colored rim light or to match LED practicals on location.

Modifiers in the set

The lights have a Mini ProLock mount. With the hyper reflector (35°), one light reaches up to 19,850 lux at 1 m. The two CF4 Fresnels focus the beam from 15° to 40°, and the barn doors let you shape it precisely, for example for a hard backlight. The three mini lantern diffusers spread soft light in all directions, which works well as ambient light above a table. For soft light on faces, use the Light Dome 40 softbox with diffusion and grid. With the two Bowens mount adapters you can also attach standard Bowens modifiers.

Power

In the studio, each light runs from its AC adapter. On location, each light can also run on a USB-C power bank (100 W input) or a V-mount battery. The included handheld bracket has a V-mount plate and turns a light into a handheld unit, and the D-Tap cables connect a battery directly. All lights are IP65-rated and can be used in the rain, from -20 to 45 °C.

Control and sound

You can control each light from its rear panel, via the Sidus Link app over Bluetooth, via DMX/RDM (locking 3-pin) or wirelessly via CRMX, each with up to 100 m range. Four dimming curves are available. For quiet takes, Medium mode keeps fan noise at 24.4 dBA at 1 m, and Silent mode turns the fan off.

Mounting

With the three super clamps and universal articulating arms, you can attach the lights to tables, door frames or rails where there is no room for a stand. The yoke also has 3/8" threads for grip accessories. Everything travels in the original case.

In the Case

• 3x STORM 80c lamp head with LED protection cover
• 3x hyper reflector
• 2x bowens mount adapter (incl. 3x 1/4'' torx screw)
• 2x barndoors
• 2x CF4 fresnel
• 3x mini lantern diffuser
• 1x light dome 40 (with EQC-bag with 1/1 diffusion, 1/2 diffusion, EQC-bag with grid net)
• Handheld bracket (incl. 1x wing screw)
• EQC-bag with 3x Aputure super clamp
• 3x Aputure universal magic arm
• 3x V-mount AC adapter rubber strap
• EQC-bag with 3x D-tap to 2.2mm DC barrel power adapter
• 3x AC power cable (4m)
• 3x AC power adapter (incl. 1x safety)
• 3x wing screw
• Warranty card and content diagram
• Original case

Don't forget to book light stands and, for battery operation, V-mount batteries.