, ,

Aputure Spotlight Mount Set 19°


  • Projection spot attachment with Bowens mount
  • 19° lens, the narrowest of the series
  • Four internal shutter blades for hard cuts
  • Gobo and iris can be used together
  • 3 B-size gobos and 18-leaf iris included
  • Color shift under 200 K, minimal fringing
  • Yoke with baby/junior pin

€35,00 /Shoot Day

1 Day
2 Days
3 Days
4 Days
5 Days
1 Week
€35,00
€66,50
€94,50
€119,00
€140,00
€171,50
+ 10% discount for online bookings · Prices excl. VAT and insurance

To the description ↓

Aputure Spotlight Mount Set 19° Specs
Optics
Mount Bowens
Beam Angle 19°
Color Temperature Shift < 200 K
Edge Color Fringing Approx. 1 mm at 5 m / 16.4'
Beam Shaping
Shutter Blades 4, internal
Drop-In Slots 2 (gobo and iris at the same time)
Gobo Size B-size
Iris 18 leaves
General
Compatible Lights Aputure LS 120d, 120d II, 300d, 300d II
Yoke Dual baby/junior mount
Housing Die-cast aluminum alloy

Description &In the Case

Description

The Aputure Spotlight Mount turns a Bowens-mount Aputure LED into a projection spot, similar to a classic ellipsoidal (profile) light. Instead of a wide, soft spread you get a defined beam with sharp edges: project a window pattern or leaf shadows onto a wall, cut light off a background or put a hard pool of light on a table.

The 19° lens

At 19°, this is the narrowest of Aputure's three lenses (19°, 26° and 36°) and the one with the most output. That helps when the light has to be placed farther away or should only hit a small part of the set. The color temperature shifts by less than 200 K, and there is hardly any color fringing at the edge of the beam, so cuts stay clean. If you need a wider beam, book the 26° set instead.

Shaping the beam

  • Four internal shutter blades cut the beam into straight-edged shapes, for example to keep light off a ceiling or to frame a doorway.
  • Two drop-in slots accept the gobo holder and the 18-leaf iris, even at the same time.
  • Three B-size gobos are included: tree, window and breakup.
  • The gel frame at the front holds color or diffusion gels.

Light and mounting

The Spotlight Mount fits Aputure point-source lights with a Bowens mount, for example the LS 300d II, LS 600d Pro and LS 600x Pro. The yoke has a combined baby/junior pin, so the spot goes directly on a C-stand, a combo stand or into a lighting grid. The die-cast aluminum body is lighter than a traditional tungsten profile light.

This rental set

Along with the Spotlight Mount and 19° lens, you get the three gobos with holder, the gel frame, the iris, a cleaning kit with blower, lens pen and cloth, and a hard case. The LED light and the stand are not included.

In the Case
  • Gobo holder in lamp
  • Gel frame at the front
  • 3x B-size gobos (tree, window, breakup)
  • Wing screw
  • Cleaning kit containing blower
  • Lens pen (2 pieces)
  • Hex key
  • Cleaning cloth
  • Suction cap
  • 18-leaf iris
  • Manual
  • Hard case

Don't forget to book a compatible Aputure LED light (e.g. LS 300d II) and a light stand.

SHOPPING CART

close