Pan/Tilt Remote Head for Blackmagic Design Micro Studio Camera 4K


  • Enables panning and tilting of a BMMSC camera remotely via SDI
  • Zoom, focus and iris control of suitable lenses
  • Included PTZ interface
  • Controllable via PTZ-link, SKAARHOJ PTZ Pro or BM Advanced Panel
  • 340° panning, ±15 degrees tilting
  • Manfrotto quick release system included
  • Silent operation for studio or live streaming
  • Can be powered via D-Tap or optional available Mini UPS battery pack

35,00

The Pan/Tilt Remote Head for Blackmagic Design Micro Studio Camera 4K consists of a Visca serial interface mounted on a pan/tilt head, with a special cable that connects to the expansion port of a Blackmagic Design Micro Studio Camera 4K. The unit runs on 12V, and powers the camera via the expansion port. The camera outputs the Pan Tilt information that is embedded in the SDI return signal (along with shading and tally information) to the interface.

This pan/tilt solution enables you to remotely adjust your shot during broadcasting via the optional available PTZ-link, SKAARHOJ PTZ Pro or Blackmagic design ATEM Advanced Panels.

The Head does not support presets. Please ask us for the detailed technical setup.

In the Case
  • Pan/Tilt Remote Head for Blackmagic Micro Studio Camera 4K
  • D-Tap > barrel plug AC cable 0.5m
  • Manfrotto 200PL quick change plate
  • Manfrotto 323 quick change adapter
  • Connector block
  • Bongo Tie
Power Source Included D-Tap > barrel plug AC cable or Mini UPS
Payload 2.7 kg (6 lb)
Mount Type 1/4″-20 tripod mount thread, 1/4″-20 camera mount stud
Dimensions  14.7 x 11.4 x 10.2 cm (5.8 x 4.5 x 4.0″)
Weight 0.8 kg (1.7 lb)

SHOPPING CART

close