, , ,

DJI Transmission Combo


  • Transmitter & High-Bright RX Monitor Kit
  • Transmit 1080p60 Video up to 5 Kilometers
  • HDMI and 3G-SDI In- and Output
  • 7″ 1920 x 1200 Touchscreen Display
  • Power via V-Mount & NP-F Batteries
  • Controls Ronin 2 / RS 3 Pro Gimbals

110,00

Transmit high-definition video around 5 kilometers (line of sight) from your DJI drone or gimbal equipment for surveillance with this transmission combo from DJI. The combo includes a transmitter and a monitor/receiver that transmits up to 1080p60 video over Wi-Fi 2.4 and 5 GHz frequencies using high-efficiency O3 Pro transmission technology. The bright monitor offers 1500 cd/m² brightness, 1920 x 1200 resolution, and a touchscreen display.

The system supports automatic frequency hopping to find the strongest signal and works with AES-256 encryption. In control mode, you can transmit to two receivers simultaneously, and in transmit mode, it can transmit to an unlimited number of receivers with slightly lower performance. In control mode, you can control your gimbal or camera using the touchscreen or physical gestures using the built-in gyroscopic sensor.

The devices can be powered by V-Mount batteries, L-series (NP-F) batteries and DC input, or they can be powered directly from a DJI gimbal like the Ronin 2 or RS 3. The monitor offers several image editing tools such as frame guide, waveform, and false color, and allows import of custom LUTs.

If needed, the range could be extended via our DJI Transmission High-Gain Antenna Set.

For easy camera control, book our DJI Ronin 4D Hand Grips Combo to easily browse trough the Sony camera menu and change your settings (A7 III/A7S III/A7M III/A7R III/A7R IV/A7 IV/FX3/A7S II/A6600/A6400 and all Sony cameras that support HDMI control).

In the Case

  • Video transmitter (incl. 2x V-Mount battery plate)
  • High-bright remote monitor (inkl. monitor frame, V-Mount battery plate)
  • Monitor sunhood
  • 10x antenna
  • 2x Tilta monitor support handle
  • RS gimbal mounting plate
  • USB C > Lemo power cable
  • Lemo > D-Tap power cable
  • Lemo > Lemo DC power cable
  • 2x BNC cable 50cm
  • 2x HDMI Cable 30cm
  • USB-A > USB-C cable
  • 2x hex key
  • 2x hex screw
  • Original hard case

Display

Panel Type Receiver: LCD
Display Size 7.0″ / 17.8 cm
Display Size Receiver: 7.0″ / 17.8 cm
Resolution Receiver: 1920 x 1200
Aspect Ratio Receiver: 16:10
Touchscreen Yes
Image Controls False Color, Focus Peaking, Screen Markers, Waveform, Zebra
Video I/O Transmitter: 1 x HDMI 1.4 Input
Transmitter: 1 x BNC (3G-SDI) Input
Transmitter: 1 x BNC (3G-SDI) Loop Output
Receiver: 1 x HDMI 2.0 Input
Receiver: 1 x HDMI 1.4 Output
Receiver: 1 x BNC (3G-SDI) Output
Embedded Audio HDMI/SDI
Audio I/O Receiver: 1 x 1/8″ / 3.5 mm Headphone Output
Power Transmitter/Receiver: 1 x Barrel Input
Other I/O Receiver: 1 x USB-C 2.0 Input
Media/Memory Card Slot Single Slot: microSD/microSDHC
Encryption 256-Bit AES

Wireless

Wireless Range 3.7 Miles / 6 km (Line-of-Sight)
# of Channels 23
Channel Bandwidth 40 MHz
Frequency Range Non-DFS Frequencies
2.4 to 2.48 GHz
5.15 to 5.25 GHz
5.72 to 5.85 GHz
DFS Frequencies
5.25 to 5.35 GHz
5.47 to 5.6 GHz
5.65 to 5.72 GHz
Latency 68 ms
RF Power < 33 dBm
Wi-Fi Wi-Fi 5 (802.11ac); Dual-Band (2.4 & 5 GHz)

Format Support

Video Format HDMI/SDI (10-Bit 4:2:2 YCC)
1080p: 60/59.94/50/30/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
Audio Format 16-Bit 48 kHz PCM Audio
Wireless Video Compression Compressed

Power

DC Input Power 6 to 18 VDC
Battery Type Transmitter/Receiver: 1 x L-Series (Interchangeable Mount)
Power Consumption Transmitter/Receiver: 11 W

Mounting

Mounting Cold Shoe

Environmental

IP Rating None
Certifications CE, FCC
*as per Manufacturer
Operating Temperature 22 to 77°F / -10 to 45°C

General

Dimensions Transmitter: 5 x 3.4 x 1″ / 127 x 87 x 26 mm
Receiver: 8.4 x 5.3 x 2″ / 213 x 135 x 51 mm
Weight Transmitter: 12.3 oz / 350 g, Excluding Antenna
Receiver: 1.6 lb / 727 g, Excluding Antenna

SHOPPING CART

close