DJI Ronin 2 Professional Gimbal System

  • Heavy duty camera gimbal system
  • 14kg payload capacity
  • Enhanced smooth-track algorithm and GPS
  • Upright, underslung and briefcase modes
  • 2-Axis mode for Steadicam-use
  • Retractable feet / self-supporting design
  • Camera control for select cameras
  • 2.4/5.8 GHz switchable remote
  • Up to 1km control range


The versatile DJI Ronin 2 Professional Gimbal System is suitable for use handheld, or mounted in a variety of ways including to a drone, Steadicam, vehicle mount, and more.

An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 14 kg. This means it can be used for everything from DSLRs up to cinema cameras such as the ARRI Alexa Mini, RED and Sony FS7.


With up to eight times more powerful motors than previous iterations, Ronin 2 can withstand sustained speeds of over 120 km/h with camera builds as heavy as 14 kg. Thanks to encoded motors and enhanced precision, the Ronin maintains the same 0.02° of accuracy as its predecessors. 

Upgraded high torque motors allow the gimbal to support a wider range of cameras, resist high winds and G-forces caused when mounted onto a car, and keep it moving smoothly in flight.

Simplified Operation

Making fine adjustments, which is essential for proper camera balancing, is now simplified with integrated adjustment knobs and a redesigned camera mounting base.

A dedicated high-brightness touchscreen for settings and adjustments has been integrated into Ronin 2, streamlining and accelerating gimbal setup. Tactile buttons including motor pause are placed easily within reach.

The extensively refined, redesigned, and expanded Gimbal Assistant app helps create content with minimum effort via new features such as CamAnchor, Time-Lapse, and Panorama, providing a more intuitive and easier-to-use full control system for Ronin 2.


Two batteries on Ronin 2, and the ability to run with only one, allows batteries to be charged and swapped without interrupting a shoot. You can also detach the dual battery mount and power the system trough the power cable.

In the Case
  • DJI Ronin 2 Gimbal
  • Grip
  • Remote controller
  • 6x intelligent battery
  • TB50 dual battery mount
  • Battery charger
  • Battery charger power cable
  • Quad charging hub
  • Power hub
  • Camera top cross bar
  • Camera base plate
  • Accessory mount
  • 2x 15mm rod
  • 15mm focus rod mount
  • Universal mount
  • Top mounting block
  • Motion block
  • ARRI Alexa Mini power cable
  • ARRI Alexa Mini start/stop cable
  • RED power cable
  • RED RCP control cable
  • Canbus to 5,5mm power cable
  • 2-pin power cable
  • Remote battery mounting cable
  • Triple D-Tap breakout box
  • SDI in cable
  • SDI out cable
  • USB type-c data cable
  • UART to D-Bus cable
  • 5x 3/8″-16 screw
  • 5x 1/4″-20 screw
  • 12x M4-10 screw
  • 4x M4-14 screw
  • 4x 1/4″ screw
  • 2x Hex key
  • Multi-tool
  • Neck strap
  • Accessories bag
  • Quick start guide
  • Original hard case

Have a look at our suitable Tiltamax Armor Man or Ready Rig GS

Electrical and Mechanical

Working Current

Static: 300 mA (at 22.8 V)

Dynamic: 500 mA (at 22.8 V)

Locked Motor: Up to 15 A (at 22.8 V)


Payload Capacity

13.6 kg (30 lb)

Precision of Control

± 0.02°

Maximum Controlled Rotation Speed

Pan Axis: 360°/s

Tilt Axis: 360°/s

Roll Axis: 360°/s

Controlled Rotation Range

Pan Axis Control: 360° continuous rotation

Tilt Axis Control: ±135°

Roll Axis Control: ±30°

Gimbal Controller


32-bit ARM processor


Independent IMU module

Temperature sensors



Operation Modes





Built-in touch panel



2.4 GHz / 5.8 GHz switchable



Bluetooth 4.0


1 x D-Bus

1 x USB Type-C

Accessory Power Ports

4 x 14.4 V camera cage (combined 8 A)

2 x 12.6 V pan motor (combined 4 A)

1 x 12.6 V D-Tap (8 A)

System Requirements

Assistant Software

Windows 7 or above

macOS 10.11 or above

iOS 9 or above

Android 4.4 or above


Camera Tray Dimensions

Maximum Depth from Center of Gravity on Baseplate: 245 mm

Maximum Height Measured from Top of Baseplate: 165 mm

Maximum Width: 180 mm

Mounting Compatibility


Car mount




Operating Temperature

-20 to 50°C (-4 to 122°F)

Dimensions (W x D x H)

Including Handle Bar: 630 x 416 x 720 mm (24.8 x 16.4 x 28.3″)

Excluding Handle Bar: 350 x 416 x 530 mm (13.8 x 16.4 x 20.9″)


Including Handle Bar: 6.4 kg (14 lb)

Excluding Handle Bar: 5.0 kg( 11 lb)